Compare rigs
Compare specifications between amateur radios. Simply select up to 3 radios and compare them side-by-side, including images and descriptions.
|
|
|
|
|
|---|---|---|---|
General |
|||
| HAM bands | 160m 80m 60m 40m 30m (WARC) 20m 17m (WARC) 15m 12m (WARC) 11m (CB) 6m 2m 1.25m 70cm 33cm 23cm 10m 4m | ? | |
| Freq. stability | ? | ? | |
| Tuning steps | ? | ? | |
Receiver |
|||
| RX-range | 0.53-2040 MHz (will tune down to 100 kHz - cellular blocked in the US) | 1.8-150 MHz | |
| Modulations | AM N-AM W-AM S-FM N-FM W-FM CW USB LSB | - | |
| Sensitivity |
530 kHz - 1.9 MHz AM: 3.5 µV (10dB S/N) 1.9 MHz - 30 MHz AM: 2.0 µV (10dB S/N) 30 MHz - 470 MHz AM: 1.0 µV (10dB S/N) N-FM: 0.35 µV (12dB SINAD) W-FM: 1.0 µV (12dB SINAD) 470 MHz - 820 MHz N-FM: 0.5 µV (12dB SINAD) 820 MHz - 2040 MHz N-FM: 2.5 µV (12dB SINAD) |
? | |
| Selectivity |
SSB/N-AM: 3 kHz (-6 dB), 9 kHz (-60dB) AM/S-FM: 9 kHz (-6 dB), 20 kHz (-40dB) W-AM/N-FM: 12 kHz (-6 dB), 25 kHz (-40dB) W-FM: 150 kHz (-3 dB), 380 kHz (-20dB) |
? | |
| Filters | ? | ? | |
| Receiver system | Triple conversion superheterodyne | ? | |
| IF-freqs. |
1st: 754.850 or 243.850 MHz 2nd: 45.05 MHz 3rd: 455 kHz |
? | |
| Image rejection | ? | ? | |
| Audio output | 800 mW (8 Ohms) max @ 10% THD | ? | |
Transmitter |
|||
| TX-range | - | ? | |
| Modulations | - | - | |
| RF-output | ? | ? | |
Connections |
|||
| Antenna | BNC | BNC | |
| Impedance | 50Ω | 50Ω | |
| Other | - | - | |
Electrical |
|||
| Power req. | 10.8-16V DC | Mains | |
| Current RX | 400 mA typical, 40 mA standby | ? | |
| TX | - | ? | |
Physical |
|||
| Manufactured | Between 2000 and 200x | Between 19xx and 19xx in Japan | |
| Dimensions |
155 × 57 × 195 mm (6.10 × 2.24 × 7.68 in) |
260 × 155 × 427 mm (10.24 × 6.10 × 16.81 in) |
|
| Weight | 2.00 kg (4.4 lbs) (MW bar aerial included) | 7.50 kg (16.5 lbs) | |
| Form factor | Mobile | Base Station | |
Other features |
|||
| Memories | 1000 channels in 20 bank(s) @ 37 channels/second | ? | |
| Usage | Amateur / Ham radio operators | Amateur / Ham radio operators | |
| Features | RS232 port. Built-in ferrite bar for MW reception. Slot card options include speech descrambler, extra memory channels, tone eliminator and more. |
- Bandscope ±25/100/250 kHz - 10 MHz Oscilloscope - Matches many Kenwood Transceivers - Wideband Transmission Monitor - RTTY X-Y Tuning Meter - Built-in 1000/1575 Hz Two-Tone Generator |
|
| Accessories | ? | ? | |
| MPN | AOR-AR-008600 | KENWOOD-SM-000230 | |
About
RigReference.com aims to become the most comprehensive reference guide for ham radio equipment. If you have any questions or suggestions, or if you'd like to participate, please get in touch.
Buy me a coffee