Compare rigs
Compare specifications between amateur radios. Simply select up to 3 radios and compare them side-by-side, including images and descriptions.
|
|
|
|
|
|---|---|---|---|
General |
|||
| HAM bands | 2m 70cm | 2m | |
| Freq. stability | ± 1.0 ppm (+25°C) | ± 3 p.p.m. | |
| Tuning steps | 5 / 6.25 / 8.33* / 9* / 10 / 12.5 / 15 / 20 / 25 / 30 / 50 / 100 / 125 / 250 kHz | ? | |
Receiver |
|||
| RX-range |
0.1–824 / 851–867 / 896–1310 (USA) 0.1–30 / 50.2–51.2 / 87.5–108 / 144–146 / 430–440 / 1240–1300 (France) 0.1–1310 MHz (Other regions) |
136-174 MHz | |
| Modulations | AM FM W-FM | FM N-FM | |
| Sensitivity |
FM (1 kHz/3.5 kHz Dev.; 12 dB SINAD) 1.625–4.995 MHz 0.32 μV typical 5.000–29.995 MHz 0.25 μV typical 30.000–117.995 MHz 0.18 μV typical 118.000–246.995 MHz 0.18 μV typical 247.000–469.995 MHz 0.18 μV typical 470.000–832.995 MHz 0.32 μV typical 833.000–1029.995 MHz 0.28 μV typical 1030.000–1309.995 MHz 0.35 μV typical W-FM (1 kHz/52.5 kHz Dev.; 12 dB SINAD) 76.000–108.000 MHz 1.1 μV typical 175.000–221.995 MHz 1.1 μV typical 470.000–770.000 MHz 1.8 μV typical AM (1 kHz/30% MOD.; 10 dB S/N) 0.495–4.995 MHz 1.3 μV typical 5.000–29.995 MHz 0.89 μV typical 118.000–136.000 MHz 0.63 μV typical 222.000–246.995 MHz 0.63 μV typical 247.000–329.995 MHz 0.79 μV typical |
Less than 0.18μV | |
| Selectivity |
AM/FM More than 12 kHz/–9 dB Less than 30 kHz/–60 dB W-FM More than 150 kHz/–6 dB |
W-FM More than 6kHz (at 6dB) Less than 14kHz (at 60dB) N-FM More than 3kHz (at 6dB) Less than 9kHz (at 55dB) |
|
| Filters | ? | ? | |
| Receiver system | Triple conversion superheterodyne | Double conversion superheterodyne | |
| IF-freqs. |
1st: 266.7 MHz 2nd: 19.65 MHz (FM/AM), 19.95 MHz (W-FM) 3rd: 450 kHz (FM/AM), 750 kHz (W-FM) |
1st: 46.35 MHz 2nd: 450 kHz |
|
| Image rejection | ? | > 60 dB | |
| Audio output | 150mW at 10% distortion, 8 ohms | 4.5W typ. (10% dist. 4Ω load) | |
Transmitter |
|||
| TX-range | - | 2m | |
| Modulations | - | FM N-FM | |
| RF-output | ? | 5 / 10 / 25 / 65 W | |
Connections |
|||
| Antenna | SMA + Built-in ferrite bar | SO-239 | |
| Impedance | 50Ω | 50Ω | |
| Other | - | - | |
Electrical |
|||
| Power req. | 4.5-6.3V DC or 2 R6/AA | 13.8V DC ±15% | |
| Current RX | 30 mA (standby), 130 mA (typical), 140 mA (max) | 0.4-1.5 A | |
| TX | - | 11 A | |
Physical |
|||
| Manufactured | Between 2010 and 201x in Japan | Between 2011 and 20xx | |
| Dimensions |
58 × 86 × 29.8 mm (2.28 × 3.39 × 1.17 in) |
140 × 40 × 162 mm (5.51 × 1.57 × 6.38 in) |
|
| Weight | 200 gr (7.1 oz) (with supplied antenna and batteries) | 1.10 kg (2.4 lbs) | |
| Form factor | Handheld | Mobile | |
Other features |
|||
| Memories | 1550 channels in 1 bank(s) @ 100 channels/second | 207 channels in 10 bank(s) | |
| Usage | Amateur / Ham radio operators | Amateur / Ham radio operators | |
| Features |
CTCSS & DTCS PC-programmable via USB Data-cloning Build-in battery charger Rotary frequency dial Ferrite bar antenna for MW Frequency shift for duplex transmissions |
CTCSS / DTCS MIL-STD 810 G tested Power supply voltage display Wide/narrow channel setting DTMF autodial Time-out timer Repeater lockout Automatic power off S-meter squelch Selectable LCD backlight color (amber, yellow and green) Weather channel receive and alert function (USA version only) Automatic repeater function (USA version only) Selectable squelch delay from short and long Squelch attenuator reduces suppression from strong signals PC to Tx and Tx to Tx cloning capability |
|
| Accessories | ? | ? | |
| MPN | ICOM-IC-R000006 | ICOM-IC-002300H | |
About
RigReference.com aims to become the most comprehensive reference guide for ham radio equipment. If you have any questions or suggestions, or if you'd like to participate, please get in touch.
Buy me a coffee